Three-story home elevators are becoming a popular choice for townhouses, villas, and renovated homes thanks to their ability to enhance convenience, increase property value, and support safe mobility for every family member. However, the question that most concerns investors is still how much does a 3-story elevator cost, what site preparation is required, and which configuration can optimize long-term costs.
Với hơn 10 năm kinh nghiệm trong lĩnh vực thang máy nhập khẩu công nghệ Châu Âu, Thang Máy Việt Ý khuyến nghị chủ đầu tư nên đánh giá đồng thời nhu cầu sử dụng, tải trọng, diện tích giếng thang và điều kiện kết cấu trước khi lựa chọn cấu hình. Điều này giúp tiết kiệm chi phí đầu tư ban đầu đồng thời đảm bảo vận hành ổn định trong nhiều năm.
3-story home elevator: Is it suitable for current residential needs and available space?
Should 3-story townhouses, villas, and renovated homes choose a 200kg, 250kg, or 350kg load capacity?
The choice of load capacity depends directly on the number of users and the actual floor area of the property.
- 200kg: suitable for ultra-small homes, with 2–3 regular users.
- 250kg: a balanced choice between space and service capacity for families of 3–4 people.
- 350kg: suitable for townhouses with 4–6 people, elderly members, or the need to transport wheelchairs and luggage.
For most townhouses today, a 350kg load capacity provides greater flexibility as usage needs increase in the future.
3-story elevators without a pit or with an ultra-shallow 200–300mm pit: a solution for properties with limited depth
For renovated homes or properties where deep foundation excavation is not possible, an ultra-shallow pit of 200–300mm or a pitless solution can significantly reduce construction costs and shorten installation time. At the same time, an OH height of only approximately 2,600mm is suitable for many properties with limited floor-to-ceiling heights.
How do 2-story and 3-story elevators differ in configuration, cost, and expandability?
Compared with a 2-story elevator, a 3-story elevator usually requires one additional landing, increases travel height, and requires a corresponding control configuration. However, the cost increase is not proportional to the number of floors, while the long-term practical value is significantly higher.
Shaft dimensions & installation structure for 3-story home elevators
Shaft, cabin, and landing door dimensions for 200kg–350kg load capacities: optimizing usable space
| Load capacity | Number of people | Reference elevator shaft dimensions (mm) | Reference cabin dimensions (mm) |
|---|---|---|---|
| 200kg | 2-3 | 1300 x 1300 | 800 x 900 |
| 250kg | 3 | 1400 x 1400 | 900 x 1000 |
| 350kg | 4-5 | 1500 x 1500 | 1000 x 1100 |
The above dimensions are for reference only and should be adjusted according to the actual design of each property.
OH height from only 2,600mm and floor-plan solutions for homes with low ceilings
For homes with low ceilings, using a gearless motor combined with a machine-room-less configuration can reduce the required OH height to approximately 2,600mm while still meeting operation and maintenance requirements.
Steel-frame shaft with tempered glass, fine-hairline stainless steel or gold mirror cabin: choosing according to the architecture
A steel-frame shaft combined with 10–12mm tempered glass is suitable for renovated properties or outdoor locations. The cabin can feature fine-hairline stainless steel or gold mirror stainless steel to coordinate with modern architectural styles.
Energy-saving 3-story elevator configuration: European Gearless motor and operating system
Sicor, Montanari – Italy gearless motors: quiet operation and optimized machine-room space
Gearless motors imported as complete assemblies from Italy operate below 50dB, reduce vibration, require no gearbox oil, and optimize space thanks to the machine-room-less design.
Approximately 40% energy savings: why is a 3-story home elevator suitable for daily use?
Gearless motors use high-efficiency drive technology to save approximately 40% in energy compared with traditional drive systems, making them particularly suitable for a family's daily usage frequency.
Control configuration, automatic rescue, and multiple safety protection layers for European-imported elevators
The integrated control system with automatic rescue device (ARD) will bring the cabin to the nearest floor and open the doors in the event of a power outage. It also includes a speed governor, safety gear to prevent free fall, Photocell infrared curtain sensors, and landing door locks to enhance safety.
Tiêu chuẩn an toàn EN 81 & giải pháp kỹ thuật khi lắp thang máy gia đình 3 tầng
Essential safety devices: landing door locks, speed governor, safety gear, and door sensors
A home elevator system should be fully equipped with landing door locks, a speed governor, safety gear, Photocell door sensors, and an automatic rescue system to ensure safe operation.
Design, installation, and commissioning must fully comply with the requirements of QCVN 02:2019/BLĐTBXH and TCVN 6395 to ensure safety during use.
Requirements for power supply, load-bearing structure, and elevator shaft construction conditions in residential properties
Before installation, the load-bearing structure, power supply, elevator shaft location, and equipment transportation plan should be surveyed to minimize unexpected issues during construction.
Safety inspection, commissioning, and periodic maintenance after completing the 3-story elevator
After installation, the system must undergo inspection and commissioning before being put into use, along with periodic maintenance to maintain safety and equipment lifespan.
How much does a 3-story elevator cost? Estimated turnkey installation costs
Cost components: European-imported equipment, Gearless motor, cabin, landing doors, and elevator shaft
The investment cost includes the main equipment, Gearless motor, control cabinet, cabin, landing doors, guide rails, electrical system, transportation, installation, inspection, and initial maintenance.
Costs vary according to 200kg–350kg load capacity, number of stops, shaft dimensions, and finishing materials
| Elevator Type | Reference price | Notes |
|---|---|---|
| Joint venture home elevator | 280,000,000đ – 450,000,000đ | Depending on load capacity and 3-5 floor configuration |
| Complete European-imported elevator | 650,000,000đ – 1,200,000,000đ | Depending on brand and configuration |
| Glass observation elevator | Increase by approximately 15% – 25% | Due to the addition of a steel frame and tempered glass |
The above prices are for reference only. Actual quotations depend on shaft dimensions, load capacity, cabin materials, number of stops, and installation conditions.
Turnkey quotation including survey, design, installation, inspection, and maintenance: how to budget accurately
Investors should request quotations that include site surveys, technical design, drawings, installation, inspection, and operating instructions to minimize additional costs during implementation.
Thang Máy Việt Ý – Giải pháp thang máy gia đình 3 tầng nâng tầm không gian sống
Consultation on observation elevator configurations, tempered-glass cabins, and fine-hairline/gold-mirror stainless steel materials coordinated with the architecture
Depending on the architectural style, customers can choose an observation elevator with a glass cabin or a premium stainless-steel cabin to create a focal point in the living space.
Free site survey, elevator shaft design, and 3D drawings based on each family's actual floor area
The technical team conducts on-site surveys and provides consultation on elevator shaft layout, load capacity, and suitable configurations to optimize space and investment budget.
Contact Hotline 0902.98.99.58 to receive consultation, cost estimates, and turnkey European-imported elevator solutions
To receive an accurate quotation based on the actual property, please contact the Hotline 0902.98.99.58 or visit the office at 104/17 Street 10, Binh Tan Ward, HCMC. Our engineering team will conduct a free survey, recommend a suitable configuration, and prepare a detailed estimate for each project.
